Buying a new furnace may not be a priority right away. But it’s wise to learn the things that will likely impact your selection when you’re ready to buy. Here are seven things you’ll want to consider when it’s time for furnace replacement in Elkhart.
1. Size and Installation Quality
To run at maximum efficiency and comfort, your furnace must be properly sized for your home. When it comes to furnaces, bigger is certainly not better. We frequently get requests from customers to purchase a big furnace in the misguided belief that a larger furnace is either more dependable or will offer better comfort.
The reverse is true. Large furnaces will short cycle, or constantly turn on and off. This leaves you cold, with more expensive energy bills and a furnace that could need replacing much sooner.
This is why it’s crucial to work with the right company when purchasing a new furnace. Even if it’s the right size but installed wrong, the U.S. Department of Energy says you could lose as much as 30% of your energy efficiency.
Another crucial component of installation is ductwork. If yours is old or improperly designed, you might have problems with noise or comfort. A furnace is only as good as the duct system it’s linked to.
At BW/Cook Service Experts, our Expert HVAC technicians are ACE certified, which means they’re knowledgeable about repairing and installing various kinds of home comfort systems. Besides technical skill, our technicians are also trained in treating you fairly. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this measures the annual gas consumption of a furnace. The greater the number, the less gas is spent during the heating process.
If your current furnace is 15 years old, it’s likely ranked well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re throwing away up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work today:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you compare new furnaces there is one more important consideration: blower technology. This part circulates air throughout your home. And it also consumes a lot of electricity, so it’s important to know about your options.
There are three types of blowers available on furnaces today. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a standard blower motor that’s been relatively the same for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology strikes a balance between price and energy efficiency. It delivers an electrical efficiency boost over a standard motor design.
- Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of running at full speed 24/7, they will quietly run at a low or medium speed at times. This helps enhance your comfort while keeping energy costs down, both in the winter and summer. And it also keeps indoor humidity in check.
4. Sound Reduction Technology
Sound has become a very significant consideration with furnace installation, so another dramatic improvement has been keeping noise under control. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Whisper-quiet gas burners
With this technology, you might not even notice that your furnace is running.
5. Smart Thermostat
You probably have a programmable thermostat, but it's quite possible you probably aren’t maximizing your energy savings. These thermostats can be complicated to program, particularly if your schedule varies from day to day.
A smart thermostat removes all the guessing about energy efficiency. Many models can learn from your temperature preferences and then create an energy-saving schedule to match. They also recognize when you’re home or away and will adjust your heating and cooling as needed.
As a bonus, you’ll also be able to monitor and change your settings from just about anyplace on your phone. Some models can even notify you if they find a problem with your furnace or remind you when it’s time to replace your air filter.
There’s a significant difference in furnace quality and reliability. Like any big purchase, we believe it’s wisest to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more assurance in the technology and that the manufacturer will stand by its product warranty over the long term.
Furnaces typically have two main warranty coverage areas:
- Heat exchanger. This is the center of the furnace and the most expensive component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can vary based on the manufacturer and furnace model.
- Main parts. This includes the blower motor, electronic controls, ignitors and other important parts. Warranties can vary from as short as a one-year limited warranty to as long as a 10-year limited warranty.
When reviewing warranty coverage, it’s important to know it's limited. So, you should make sure you understand the limitations. For example, nearly all standard manufacturer warranties only include the price of the replacement part, not labor. And labor on a new heat exchanger could get very expensive.
Once your new furnace is installed, make sure you finish the product registration immediately. Many manufacturers may reduce the warranty term if the product registration is not completed. This step is simple and usually only takes a few minutes.
How much does all this cost anyhow? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency system.
As you consider these costs and the impact to your budget, keep in mind that unlike nearly every other appliance you may need to buy, your new furnace may help pay for itself from the monthly energy savings it provides.
A couple of additional ways to save include:
- Getting a new air conditioner simultaneously.
- Purchasing at the right time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this less busy season.
- Take advantage of rebates from the federal and state government, as well as from your local utility company. We can help you figure out this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to look for in a new furnace, when should you replace your old one? Here are a few tips from our Experts that will help you make that decision.
Heating systems usually last 15–20 years. How long yours will last depends on whether you’ve done furnace maintenance, where you live and your temperature preferences. If you’re somewhere with harsh winters, your furnace will operate more often, potentially making it wear out sooner. The same applies if you like to keep your home at a hotter temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces age, the likelihood for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be especially expensive. Common and expensive repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the cost of a new furnace, it’s generally recommended to replace it.
Furnaces older than 15 years can be extremely inefficient. You could be wasting as much as 30% of the money you spend to heat your home. Excessive energy costs and the desire to reduce energy consumption are also strong reasons to consider replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to lower their energy bills.
Trust Your Furnace Replacement to the Experts
It can feel intimidating trying to research furnace features on your own. Or know exactly when you should get a new furnace. Our BW/Cook Service Experts Experts are here to make the process much smoother. Call us at 574-218-6404 or schedule an appointment online to request your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.